How to Shape Metal – From 2 Dimensions to 3 Dimensions
Artist Kevin Caron shows how to take flat sheets of metal & make 3 dimensional shapes.
Read MoreCategory: General Welding
How to Easily Improve Your Welds and Safety
Artist Kevin Caron shares a simple welding tool he says may be the handiest tool he’s made in his studio ….
Read MoreHow to Integrate Tack Welds
How to Integrate Tack Welds is a free how to video from Phoenix artist Kevin Caron.
Read MoreHow to Modify Your Welder Cart
How to Modify Your Welder Cart free how to video – Kevin Caron
Read MoreHow to Avoid Blowouts When Welding Closed Vessels
Sculptor Kevin Caron shows how he prevents that last weld from blowing out ….
Read MoreHow to Easily Prevent Warping When Welding
Artist Kevin Caron shows how to easily prevent warping when welding.
Read MoreWhy Can’t I Use 1 Gas For All Welding?
Artist Kevin Caron explains why you can’t use just one type of gas for all welding in this free how to video.
Read MoreWhy You Should Read the @#$% Manual
Kevin is looking through the little paper manual that came with the Everlast Power i-MIG 253DPI. He was having trouble with melting the contact tips and fittings that go in the end of the MIG gun. Both of their ends are melted...
Read MoreHow to Easily Tack Aluminum When TIG Welding
If you don’t have a third hand tool or have some way to jig up your work when TIG welding aluminum, how do you hold a piece in place so you can tack it? Obviously, you can’t use magnets. Kevin has found if you put...
Read MoreHow to Prevent ‘Blowout” When Welding Thick Metal to Thin
Kevin admits even he forgets this at times, but when welding thin metal to thick, you always want to keep most of your heat on the thick piece of metal. He has a 1/2″ and a 1/8″ piece of aluminum jigged up on his...
Read MoreAre Multiprocess Welders Prone to Failure?
Are Multiprocess Welders Prone to Failure? free how to video – Kevin Caron
Read MoreHow to Use Tack Welding to Keep Your Work Straight
How to Use Tack Welding to Keep Your Work Straight, a free how to video by Kevin Caron.
Read More